Good Wholesale Vendors Electrical Wire Splice - 8p8c rj45 rj11 Modular Plug Cable Connector PCB Mount Jack Female Socket Network Interface Cable RJ45 Connector – Weinuoer
Good Wholesale Vendors Electrical Wire Splice - 8p8c rj45 rj11 Modular Plug Cable Connector PCB Mount Jack Female Socket Network Interface Cable RJ45 Connector – Weinuoer Detail:
| Model Number | rj11 55-4P4C-H15mm | Connector type | RJ11 modular connector |
| Voltage Rating | 125Vac RMS | Current Rating | 1.5AMP |
| Insulation Resistance | 500mΩ Min | Contact Resistance | 30mΩ Max |
| Dielectric Withstanding Voltage | 1000Vac RMS 50Hz 1MIN | Durrability | 750 cycles min |
| Insetion Force | 2.2Kgf max | Operation Temprature | -40°C t0 70°C |
| Storage Temprature | -40°C t0 85°C | Contact Material |
Phosphor bronze Φ0. 46mm |
| Plating | gold plating Fu”- 50u’ over nickel | Housing Material |
(1)glass filled PA66(UL94V-0) (2)glass filled PA6(UL94V-0) (3)glass filled PBT(UL94V-0) |
Product Information
RJ11:
RJ11 usually refers to a 6 position (6 pin) modular jack or plug. There is no international standard for this connector and it is referred to in the Universal Integrated Wiring Standard. Also, the name is often used for 4-pin versions of modular connectors, causing confusion.
The RJ11 interface is similar to the RJ45 interface, but only has 4 pins (RJ45 has 8 pins). In computer systems, RJ11 is mainly used to connect the modem.
RJ45：
RJ45 connector consists of a plug (connector, crystal head) and a socket means “registered socket “
Classification of RJ45 interfaces
The wiring structure and appearance of information
According to shielding performance is divided into unshielded module and shielding module.
When installing a shielded cable system, the entire link must be shielded, including cables and connectors, using shielded information modules.
According to whether the module needs to be connected, the information module has the information module of line type and no line type.
The twisted-pair wire should be pressed into the connection slot of the information module with a special wiring tool. The design of wire-free tool is also a embodiment of the humanized design of the module.
Function:
The RJ45 Modular Plug, also known as the RJ45 Crystal Plug, is used for terminating data cables, enabling connections and changes between devices and distribution rack modules. The RJ45 crystal head requires good conduction performance; The gold-plated thickness of the contact triprate reed is 50μm, which meets the transmission standard of Class 5 and conforms to the line sequence of T568A and T568B. It has the functions of preventing loosening, plugging and self-locking.
The RJ45 plug is a standard connector in the copper cable wiring. It and the socket (RJ45 module) together form a complete connector unit. A connector composed of these two components is connected between the wires to achieve electrical continuity of the wires. It is also an integral part of the integrated wiring technology finished jumper, the RJ45 crystal head is usually connected to both ends of the pair of twisted cables. In the specification of the comprehensive wiring design installation, this accessory product is usually not listed separately, that is, do not advocate the user to complete the twisted pair and RJ45 plug connection work.
RJ11 & rj45 difference
The difference between RJ11 and RJ45: different standards, different sizes (RJ11 has 6P6C6P4C4P4C4P2C, where C represents the number of gold needles in the crystal head; Eight RJ45 p8c).
RJ11 is 4 or 6 pin and RJ45 is 8 pin connection device. Due to the difference in size, it is obvious that the RJ45 plug cannot be inserted into the RJ11 jack. The reverse is physically possible because the RJ11 plug is smaller than the RJ45 jack, thus giving the illusion that the two should or could work together. Actually, it’s not. It is strongly recommended not to use the RJ11 plug for the RJ45 jack.
Because RJ11 is not standardized, its dimensions, insertion force, insertion Angle, etc. are not consistent with standard connector design requirements, thus interoperability cannot be guaranteed. They even cause damage to both. Since the RJ11 plug is smaller than the RJ45 jack, the plastic parts on both sides of the plug will damage the metal pins in the inserted jack.
Packing & Delivery
Packing
1: Neutral packing: Bulking packing in Poly bag +inner box +carton
2: Upon customers’ request
Payment & Delivery
Payment: TT,LC, Western Union, Money Gram, PayPal etc., T/T 30% as deposit and the balance before delivery. We’ll show you the photos of the products and packages.
Delivery time: 7-10 working days after the payment confirmed.
Shipment: Ship worldwide by sea, air, express delivery, like DHL, UPS, TNT and FEDEX etc.
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Good Wholesale Vendors Electrical Wire Splice - 8p8c rj45 rj11 Modular Plug Cable Connector PCB Mount Jack Female Socket Network Interface Cable RJ45 Connector – Weinuoer , The product will supply to all over the world, such as: Spain, Durban, Swiss, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
By Jean Ascher from Greenland - 2017.03.28 12:22
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Elizabeth from Australia - 2018.06.05 13:10
